102 LIST OF SCREENS NAVIGATION LIST OF SCREENS If an error occurs with the machine, one of the following messages appears in the LCD display. In case of trouble, immediately contact your local dealer for inspection and repair. While the ( ) (information mark) appears onscreen, press the information switch, and detailed information will be displayed. Notify your local dealer of this and other information. No. Message Problem or failure (What happened) Machine behavior (Provisional measure) Correction 1 Clock setting request The battery is disconnected, thereby requiring to set the clock. Press Switch 5 to set the clock. - 2 Tilt up the lock lever. This message indicates a procedural step.
Tilt up the pilot control lock lever. This message disappears by tilting up the pilot control lock lever. - 3 Tilt down the lock lever. This message indicates a procedural step. Tilt down the pilot control lock lever. This message disappears by tilting down the pilot control lock lever. - 4 Start the engine. This message indicates a procedural step. Start the engine. This message then disappears. - 5 Press Switch 3. This message appears if the AUX function is tried without pressing the AUX port enable switch. Press the AUX port enable switch. - 6 Not equipped with AUX2/Thumb function The AUX2 port is tried on machines not equipped with AUX2 function. - -