The careful performance of all prescribed inspections is the best prerequisite for the machine’s continuous readiness for operation. The inspections are obligatory. If omitted, this may affect the warranty covered by us. All maintenance work specified should be performed in the prescribed sequence with the machine at operating temperature. The machine must be thoroughly cleaned before inspection takes place. Maintenance and Inspection Plan (for trained dealer service personnel) Wheel Loader The following applies to maintenance and inspection work: TL160 The following checklist should be followed when handing over the machine to the op- erator:
Go through the Operating Instructions (page by page) and explain them in detail through practical training on the machine. Items which are particularly important in- clude:
Accident Prevention Regulations published by the employer’s liability insurance associations in the user’s country Explanation of maintenance intervals and points according to Maintenance and Inspection Plan by demonstrating and explaining maintenance points on machine Lubrication intervals and points of lubrication according to lubrication chart and demonstration of these points on the machine Instructions for ordering spare parts - always state the type of machine, the vehicle identification number ("Fz-Id.Nr."), parts designation, complete spare part number, number of pieces, delivery address, etc.
The warranty/handing-over card must be filled out correctly and sent back to the manufacturer. Handing over the Machine and Instructing the Operator Explanation of inspection cards and note on maintenance and inspection plan. Structure of Spare Parts List, Figures and the associated texts Handing-over of Diesel Engine Operating Instructions Operator controls, indicating and warning elements Checks before putting the machine into operation Driving, speed ranges, notes for driving on roads Explanation of warranty offered by manufacturer.
Starting and stopping the diesel engine Recovery and transport of the machine Diesel engine running-in instructions Explanation of hydrostatic travel drive Operation of quick-attach system Operation of all functions Technical Specifications 1. Operating Manual 2. Spare Parts List 3. Warranty