Technical Specifications 3 3.8 Tires Tab. 9 Technical specifications - tires Special tires available on request! If solid-rubber or foamed tires are used, special measures must be taken and restrictions apply. Attention The tire pressure refers to standard equipment. During fork lift operations, the tire pressure of the front wheels must be increased by at least 0.5 bar. 3.9 Fuels, lubricants, and coolants 3.9.1 Fluid capacities All values stated are approximate. The level marking is always the decisive factor. Tab. 10 Fluid capacities * The hydraulic oil quantity depends on the equipment level of the machine.
29/112 TL160 Operating Manual 12.9.08 Version 1.0 Tire size Type Profile Tire pressure in bar front Tire pressure in bar rear 15.5 R 25 GP2B L-2 3.5 2.5 17.5 25TL 12 PR SGL 2.5 2.0 16/70-24 EM 10 PR E 91-2 4.0 2.5 19.5 LR 24 XM 27 TL 2.7 2.0 15.5 R 25 XHA 3.5 2.5 17.5 R 25 XHA 2.5 2.0 17.5 R 25 XTLA 2.5 2.0 455/70 R 24 SPT9 TL 3.7 2.5 15.5 25TL 12 PR EM60 3.5 2.5 Fluid capacities in liters Fuels and lubricants Fuel tank 140.0 Diesel fuel Engine with oil filter 9.5 Engine oil (change quantity) Hydraulic oil, tank, system, brakes 99.0* Hydraulic oil Hydraulic oil tank 72.0 Hydraulic oil (change quantity) Front axle center housing 13.5 Transmission oil Rear axle center housing and transmission (standard) 15.7 + 1.1 Transmission oil Rear axle center housing and transmission (high-speed version) 15.7 + 1.1 Transmission oil Wheel hubs, front / rear axle 1.7 each Transmission oil Coolant 28.0 Mixture of water, additives and glycol (50 / 50)