Operation 4 Driving off Set the travel direction preselection rocker switch on the joystick (19/7) and on the instrument panel (19/36) to “0” (neutral position). Option S-Version Option "S"-version 66 12 Km/h The indicator lamps (19/24 and 19/28) must not light up. 67 00014,0 h Start engine. 24 28 68 00014,0 h 21 Km/h Raise lift frame as far as the “Travel” height mark (20/1). 00 Km/h N 00014,0 h Select speed range "FAST" or “SLOW” (19/33) as required. + - P 12 Km/h High-speed version (option) - select speed range I or II (19/34). 00014,0 h 0 4/4 1/2 Observe the indicator lamp (19/66-68). Release the parking brake (19/54).
Adjust the desired travel direction using the preselection switches (19/7 / 19/36 respectively). The indicator lamp (19/24 or 19/28) lights up. 33 34 3 2 36 Press accelerator pedal (19/3). The machine only drives off once a certain engine speed is reached. P Travel speed is increased and decreased using the accelerator pedal. Travel speed directly depends on engine speed. + - 00014,0 h 12 Km/h 0 4/4 1/2 7 The direction of travel may be changed quickly by operating the preselectors (19/7 / 19/36 respectively). Coming to a halt 54 Travel speed is reduced by releasing the accelerator pedal. The hydrostatic travel drive acts as a non-wearing auxiliary brake. Fig.
19 Driving off and coming to a halt Operate the brake-inching pedal (19/2) as required. 1 Also refer to О 4.8.3, 50 Fig. 20 Height color mark 49/112 TL160 Operating Manual 12.9.08 Version 1.0