Operation 4 4.8.4 Driving on roads Before driving on open roads, the following points have to be observed: 1 Endangerment of road-traffic due to missing equipment. Ensure that the wheel loader is equipped as stipulated by the regulations authorizing the use of vehicles for road traffic in the user's country. Empty the bucket and tilt back completely. Fig. 22 Height color mark Attach the protective device onto the front bucket edge. Secure the side-dump bucket with socket pins. Completely retract the high-tip bucket. Fold up the forks of the fork lift attachment, lock in place and secure against lateral shifting. Danger to life due to rigid forks.
Rigid forks must be dismounted before driving on public roads! + - P 12 Km/h 00014,0 h 0 4/4 1/2 Raise the lift frame as far as the height color mark (22/1) until sufficient ground clearance is secured. Set the travel direction preselection rocker switches on the joystick (23/7) and on the instrument panel (23/36) to "0" (neutral position). Switch off the working hydraulics (23/35). 35 36 Attention Only press when machine is stationary! + - P 00014,0 h 12 Km/h 0 4/4 1/2 Check the function of the direction indicators, hazard warning lights, horn, low/high beam. 7 Close the cabin door. Fig. 23 Driving on roads 51/112 TL160 Operating Manual 12.9.08 Version 1.0