Terex TL160 — 7.7.2 Daily and weekly tasks

Care and Maintenance 7 Tab. 26 Daily tasks Tab. 27 Tasks to be performed weekly 71/112 TL160 Operating Manual 12.9.08 Version 1.0 Daily Chapter 1 Check hydraulic oil level. Î 7.8.10, 92 2 Check engine oil level. Î 7.8.2, 76 3 Check fuel level (fuel gauge on instrument panel). Î 7.8.5.1, 81 4 Check windshield washer-fluid level. Î 7.8.20, 102 5 General visual inspection for material cracks, external damage, completeness, etc. 6 Draining the water separator. Î 7.8.5.2, 81 7 Check for leaks in pipes, hoses, control unit, hydraulic pumps, cylinders, etc. Attention The screw-in couplings must be locked when tightening hose or line connections to prevent rotation.

8 Check function of electrical indicating and warning elements, and the lighting system. 9 Check smooth running of operator controls. Weekly Chapter 10 Drain fuel filter. Î 7.8.5.3, 82 11 Check the cooling fins of the combined cooler. Î 7.8.4.4, 80 Machine damage due to strong accumulation of dust. • Clean the combined cooler by hand. 12 Check that door catches function perfectly. 13 Check tire pressure and tightness of wheel nuts. Î 7.8.15, 99 14 Check fastening of axles and propeller shaft. 15 Check bearing bushings and pins/bolts of work equipment. 16 Check pins/bolts, bushings, and the linkage assembly of the articulated steering.

17 Check that pneumatic springs of engine hood function perfectly. 18 Check function of brakes. 19 Check if the dust filter for cabin ventilation is dirty and clean if required. Î 7.8.19, 102 Machine damage due to strong accumulation of dust. • Shorten the inspection and cleaning intervals. 20 Check function, condition and completeness of safety devices. 21 Grease machine according to overview of lubricating points. Î 7.7.3, 72