Care and Maintenance 7 7.7.4 Inspection plan Work to be carried out by trained dealer service personnel. Tab. 29 Inspection plan 1 At least every two years. 2 Extension of oil change intervals according to oil sample analysis and laboratory report О 7.2, 64. 3 Within warranty. 74/112 TL160 Operating Manual 12.9.08 Version 1.0 O = Checking, maintenance X = Replace operating hours min. 2 x min. 1 x Perform work with machine at operating temperature after 100 ev- ery 500 ev- ery 1000 ev- ery 2000 an- nual- ly an- nual- ly Chapter 1 Check whether machine-specific Operating Manual is in the machine. O O 2 Change engine oil. X X Î 7.8.2.2, 77 3 Change engine oil filter.
X X Î 7.8.3, 78 4 Drain water from fuel tank. O O O Î 7.8.5.5, 83 5 Change fuel filter. X X Î 7.8.5.4, 82 6 Check air intake. O O Î 7.8.6, 83 7 Replace air filter main cartridge. according to service indicator X Î 7.8.6.5, 85 8 Replace air filter safety cartridge. as required 1 Î 7.8.6.4, 84 9 Check level of antifreeze in coolant. O Î 7.8.4.2, 78 10 Change coolant. as required 1 Î 7.8.4.3, 79 11 Check V-belt tension. O O Î 7.8.7.2, 87 12 Check engine mounting and pump attachments. O O 13 Check engine speed adjustment, upper and lower idling speeds. O O 14 Check valve lash on engine and adjust if necessary. O O Î 7.8.8, 89 15 Check injection valves.
O Î 7.8.8, 89 16 Check crankcase breather in valve cover. O 17 Check acid level and battery connections. O O Î 7.8.17.1, 100 18 Check condition of tires, tire pressure and tightness of wheel nuts. O O Î 7.8.15, 99 19 Check fastening of axles and propeller shaft. O O 20 Check bearing bushings and bolts of work equipment and replace if necessary. O O 21 Check bushings and bolts of the articulation and the articulated steering and replace if necessary. O O 22 Check that door catches function perfectly, and replace if necessary. O O 23 Clean or replace the dust filter for cabin ventilation. O X X Î 7.8.19, 102 24 Check electrical indicating and warning elements and lighting equipment.
O O 25 Check smooth running of operator controls and adjust if necessary. O O 26 Check for leaks in all pipes, hoses, control valves, hydraulic pumps, cylinders, etc. O O Attention The screw-in couplings must be locked when tightening hose and line connections to prevent rotation. 27 Check or change hydraulic oil. O O X 2 X Î 7.8.10, 92 28 Replace insert of hydraulic oil return suction filter. X X X Î 7.8.10, 92 29 Replace breather. X X Î 7.8.13, 95 30 Check function of brakes and brake disc play. O O X X Î 7.8.9.2, 90 31 Bleed brake O O Î 7.8.9.2, 90