Komatsu — 3.5.3.2 CAB WITH FRONT DOOR AND SIDE WINDOWS (available on request)

GUARDS AND DRIVER’S SEAT 3.5.3 CAB 3.5.3.1 STANDARD CAB q The cab is ROPS and FOPS homologated - level I; if the cab is subjected to an impact, or if the machine over- turns, immediately contact your Komatsu Dealer, who will check the stiffness of the cab and make sure that the operatorнs safety is guaranteed. q For maintenance or routine operations, the cab must be raised; carry out this operation according to the proce- dure described in section "3.5.3.4 RAISING THE CAB" and keep to all the safety precautions indicated therein. The cab is of the semi-closed type. The windows are positioned on the rear and upper part and the rear window can be removed.

In a special version of the machine, available on request, the cab can be completely closed through the addition of side win- dows and front door. 3.5.3.2 CAB WITH FRONT DOOR AND SIDE WINDOWS (available on request) q When opening or closing the front door, always shift the safety bars to the lock position. The accidental shifting of the control levers when these aren't locked may cau- se serious accidents. q When opening the front window, always hold the hand- les firmly with both hands and do not leave hold until the automatic lock is engaged. q Pay the utmost attention when closing the door, since this will move more quickly due to its own weight.

q Do not open the front door with the windshield wiper in operation, to prevent the blade from stopping in an in- correct position and interfering between the windshield wiper and the cab structure, with inevitable damage to the moving parts. q Before opening the front door, stop the windshield wiper by pressing the switch to position OFF and make sure that the wiper blade returns to the rest position (vertical). (See "3.3.3 pos. 16 - WINDSHIELD WIPER/ WASHER SWITCH (if provided)". 102 WARNING CAUTION