Komatsu — 3.5.7 EMERGENCY EXIT

GUARDS AND DRIVER’S SEAT 3.5.6 SAFETY BELT q Before starting the engine, fasten the safety belt. q The safety belt must be changed when it is frayed, dam- aged or worn and in any case every 4 years. The safety belt (1) is of the type with two coupling points and adjustable length (2); it must be well tightened and hold the op- eratorнs hips, while leaving the upper part of his body complete- ly free. 3.5.7 EMERGENCY EXIT The machine is provided with an emergency exit located in the rear window (1). In case of emergency, pull the plate (2) positioned on the up- per side of the window and remove the weather strip com- pletely. Push the window toward the outside. 2 RWA36330 108 WARNING