Komatsu — 3.6.7 MOVING ON SLOPES

USE OF THE MACHINE 3.6.7 MOVING ON SLOPES q Before working on slopes, always check the functionali- ty of the parking brake. q Always go up or down slopes at moderate speed and with the heavier end of the loader always directed towar- ds the top of the slope. q When going up or down slopes, keep the equipment lowered; movements with raised arm may cause the ma- chine to overturn. RWA31560 q Do not use the speed increase function when the ma- chine travels on slopes. When working on slopes some precautions should be taken to avoid risks for the operator and anyone in the vicinity; the che- cks and operations to be carried out are the following:

1 - Always check the work area for snow, landslips, gravel, lo- ose ground and anything that may suddenly modify the work conditions and the stability of the machine. 2 - When going up or down a slope with empty bucket, make sure that the bucket is always directed downwards with respect to the machine body. RWA31570 3 - When going up or down a slope with full bucket, make su- re that the bucket is always directed upwards with respect to the machine body. 4 - When moving the machine during work, always lower the bucket.

5 - Carry out any lateral movement on a flat surface at the beginning or at the end of the slope; if this is not possible, move obliquely, keeping the machine axis as parallel to the slope direction as possible. Do not move too obliquely or, even worse, with the machi- ne axis rotated by 90є with respect to the slope direction. RWA31580 RWA31590 122 WARNING