Komatsu — 3.13.6.1 REMOVING THE BUCKET OR THE EQUIPMENT

USING THE WORK EQUIPMENT 3.13.6.1 REMOVING THE BUCKET OR THE EQUIPMENT q Do not remove the bucket or the equipment when they are lifted or when a suitable support is not available: if they fall down, they may cause serious damage and even death. Carry out all the operations with the bucket or the equipment resting on the ground. 1 - Lower the arm completely and rest the bucket on to the ground in horizontal position. 2 - Stop the engine, release the residual pressure and lock the controls by lifting the safety bars in vertical position. 3 - Rotate the levers (1) towards the outside in vertical posi- tion to release the coupling pins (2).

4 - Start the machine again and move gradually in reverse, at the same time rotating the tool-holder plate (3) forward until releasing it from the upper seat on the bucket (4). 139 WARNING