Komatsu — 4.8.1.e CHECKING THE BATTERY CHARGE LEVEL

MAINTENANCE PROCEDURE 4.8.1.e CHECKING THE BATTERY CHARGE LEVEL q Check the battery charge level only with the engine at rest. q To prevent gas explosions, do not use naked flames, do not smoke and avoid producing sparks due to short circuits. q The battery electrolyte is dangerous: in case of contact with the eyes or the skin, wash with plenty of running water and consult a doctor. The battery is maintenance-free. IMPORTANT q Make sure that the connection terminals are not oxidized; if necessary, clean them and cover them with anti-oxidation grease. The battery (1) can be reached after opening the engine hood (see "3.5.1 ENGINE HOOD".

A visual indicator (2) signals the battery charge level with dif- ferent colours, according to the table positioned beside the in- dicator: q Green: the charge is correct q Grey: the battery needs recharging q White: the battery must be changed q If a dry battery is installed, check the electrolyte level, which must be approximately 6 mm above the plate edge; if necessary, top up using distilled water only. If, on the contrary, the level is low because some elec- trolyte has been spilt, add sulphuric acid, diluted as much as necessary to reach the concentration suitable for the ambient temperature (see "3.11.3 BATTERY").

q It is advisable to add distilled water before starting work, in order to prevent it from freezing. q Before putting back the cell plugs, make sure that the breather holes are not clogged. 177 WARNING CAUTION