Komatsu — 6.2.3 CONNECTING THE RETURN CIR CUIT WITH DIRECT DRAINAGE INTO THE TANK

CHANGING THE AUTHORIZED EQUIPMENT 6.2.3 CONNECTING THE RETURN CIR- CUIT WITH DIRECT DRAINAGE INTO THE TANK q Before performing any operation on the hydraulic cir- cuit, stop the engine and eliminate the residual pres- sures from the equipment circuits by operating the controls more than once, then lock the safety bars (see "3.3.5 pos. 1 - SAFETY BARS"). q Immediately clean any area dirty with oil. The machine may be fitted for the application of equipment with separate return circuit directed into the tank. The return system is positioned on the left side of the loader arm and the equipment drain pipe must be connected to the union (1).

IMPORTANT q In case of doubts regarding the connection of the hy- draulic circuit to the equipment, contact your Komatsu Dealer. 1" UNS 1 RWA36100 215 WARNING