QSB4.5 and QSB6.7 Engine Identification Section E - Engine and System Identification Page E-3 Fuel Injection Pump Dataplate The Bosch™ fuel injection pump dataplate is located on the fuel pump. The dataplate contains the following information to assist in servicing or replacement: Pump serial number Cummins® part number Factory code Bosch™ part number Date code. ECM Dataplate The electronic control module (ECM) dataplate shows information about the ECM and how the ECM was programmed. The dataplate is located on the ECM. The following information is available on the ECM dataplate: ECM part number (PN) ECM serial number (SN) ECM date code (DC) Engine serial number (ESN) ECM code:
Identifies the software in the ECM. NOTE: Have the ECM code for the engine available when communicating with a Cummins® Authorized Repair Location. NOTE: The presence of an ECM dataplate depends on the manufacturing plant and the date the engine was manufactured. If an ECM dataplate was not installed by the manufacturing plant, calibraton data can be found on the engine dataplate. Air Compressor NOTE: Not all engines are equipped with an air compressor. The Cummins® branded air compressor dataplate, identified by the Cummins Inc. logo, is typically located on the side of the air compressor. The dataplate contains the following information to assist in servicing or replacement:
Cummins® part number Serial number Date code.