Cummins — 4021531

Troubleshooting Symptoms Charts QSB4.5 and QSB6.7 Page TS-60 Section TS - Troubleshooting Symptoms Lubricating Oil Sludge in the Crankcase Excessive Cause Correction Check the bulk oil supply. Drain the oil and replace with noncontaminated oil. Replace the oil filter(s). Refer to Section 5. Use the oil recommended in Section V. STEP 1 Bulk oil supply is contaminated ............. OK Go To Next Step STEP 2 Coolant temperature is below specification ............. Refer to the Coolant Temperature Below Normal symptom tree. OK Go To Next Step STEP 3 Crankcase ventilation system is plugged ............. Check and clean the crankcase breather and vent tube. Refer to Section 3.

OK Go To Next Step STEP 4 Fuel grade is not correct for the application or the ............. Operate the engine from a tank of high-quality fuel. Refer to Fuel Recommendations and Specifications in Section V. fuel quality is poor OK Go To Next Step STEP 5 Lubricating oil does not meet specifications for operating conditions ............. Change the oil and filters. Refer to Section 5. Use the oil recommended in Section V. OK Go To Next Step STEP 6 Contact a Cummins® Authorized Repair Facility