Maintenance Schedule QSB4.5 and QSB6.7 Page 2-4 Section 2 - Maintenance Guidelines 3 Follow the manufacturer's recommended maintenance procedures for the starter, alternator, generator, batteries, electrical components, exhaust brake, charge-air cooler, radiator, air compressor, air cleaner, refrigerant compressor, and fan clutch. 4 This cooling system requirement to Flush at this scheduled maintenance includes: Drain, Flush, and Fill. 5 If a separate air filter is used for the air compressor air supply, please reference the original equipment manufacturer (OEM) Manual for Maintenance Guidelines and Schedule.
Oil Drain Intervals See table 1 to determine the maximum recommended oil change and filter change interval in hours or months, whichever comes first. * The oil drain interval must be reduced by 20 percent if American Petroleum Institute (API) CJ-4 (Cummins® Engineering Standard 20081) lubricating oil is used with diesel fuel containing 0.05 to 0.5 mass percent [500 to 5000 ppm] sulfur content. Table 1:
Recommended Oil Change and Filter Change Intervals American Petroleum Institute Classification (API) European Classification (ACEA) Fuel Sulfur Content Engine Rating is 261 Hp [195 kW] or greater Engine Rating is 260 Hp [194 kW] or less CJ-4 (CES 20081) ACEA E9 250 hours or 6 months 500 hours or 6 months JAMA DH-2 500 to 5000 ppm 200 hours* or 6 months 400 hours* or 6 months CI-4 (CES 20078) ACEA E7 up to 5000 ppm 250 hours or 6 months 500 hours or 6 months API CH-4/SJ (CES 20071, 20076, or 20077) ACEA E5 JAMA DH-1 up to 5000 ppm 250 hours or 3 months 500 hours or 6 months API CF-4/SG (CES 20075) ACEA E3 ACEA E2 up to 5000 ppm 125 hours or 6 weeks 250 hours or 3 months API CD API CE API CG-4/SH ACEA E1 up to 5000 ppm Obsolete.
Do not Use Obsolete. Do Not Use