QSB4.5 and QSB6.7 Coolant Level Section 4 - Maintenance Procedures at 250 Hours or 3 Months Page 4-5 Do not add cold coolant to a hot engine. Engine castings can be damaged. Allow the engine to cool to below 50°C [120°F] before adding coolant. CAUTION Coolant added to the engine must be mixed with the correct proportions of antifreeze, supplemental coolant additive, and water to avoid engine damage. Coolant recommendations and specification details on correct mixing of coolant can be found in Maintenance Specifications (Section V). Fill the cooling system with coolant. Refer to the markings on the radiator or expansion tank for coolant levels or refer to the OEM manual. NOTE:
Some radiators have two fill necks, both of which must be filled when the cooling system is drained.