23.
MAINTENANCE SCHEDULE CHART SERVICE ITEM PAGE EVERY 1000 HOURS SERVICE (continued) ‡ Torque converter mount trunnion (1 point) 3-70 ‡ Fan pulley (1 point) 3-71 Tension pulley (2 points) 3-71 Check tightening parts of turbocharger 3-71 Clean fuel strainer 3-71 Tighten ROPS canopy 3-71 Replace corrosion resistor cartridge 3-72 EVERY 2000 HOURS SERVICE Change oil in hydraulic tank, replace hydraulic filter element 3-73 Clean hydraulic tank strainer 3-76 Replace hydraulic tank breather element 3-77 Change axle oil fl 3-78 Replace air conditioner filter (if equipped) 3-79 Clean PPC circuit strainer 3-80 Check wear of brake discs 3-81 Check alternator, starting motor 3-82 Check engine valve clearance, adjust 3-82 Clean and check turbocharger 3-82 Check play of turbocharger rotor 3-82 Check accumulator 3-82 EVERY 4000 HOURS SERVICE Check water pump 3-83 Check engine vibration damper 3-83 Check fan pulley and tension pulley 3-83 Check air compressor, adjust 3-83 Check injection pump rack rubber boot, replace 3-83 fl The interval of 2000 hours for changing the axle oil is for standard operations.
If the brake is used frequently or the brakes make a sound, change the oil after a shorter interval. 3-20