11. EXPLANATION OF COMPONENTS 5. BUCKET CONTROL LEVER This lever operates the bucket. 1 TILT ( U ): When the bucket control lever is pulled further from the TILT position, the lever is stopped in this position until the bucket reaches the preset posi- tion of the positioner, and the lever is returned to the HOLD position. 2 HOLD ( N ): The bucket is kept in the same position. 3 DUMP ( & ) 6. LIFT ARM CONTROL LEVER This lever is used to operate the boom. 1 RAISE ( J ): When the lift arm control lever is pulled further from the RAISE position, the lever is stopped in this position until the lift arm reaches the pre- set position of the kick-out, and the lever is returned to the HOLD position.
2 HOLD ( N ): The lift arm is kept in the same position. 3 LOWER ( M ) 4 FLOAT ( * ): The lift arm moves freely under external force. 2-24