. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN FINAL DRIVE CASE WARNING 4 - 75 The oil is at high temperature immedia tely after the machine has been operated. Wait for the oil to cool down before starting the operation. There is danger that oil spouts out du e to the internal pressure. When removing the plug, work fr om the side, turn the plug slowly to release the int ernal pressure , and remove it c Refill ca pacity: 61 lite rs (16.12 US 1. Remo ve oil filler plu g (F), then re move drain plu g (1) and level plug ( G), and drain the oil. d and dirt fr om around oil filler plug (F) Remo ve al l t he mu filler (F) before removing it.
Be careful no t to let any dirt or sand ge t in when adding 2. After d raining the oi l, tighten the drain plug ( 3. Remo ve level plug ( G), refill gear oil from oil fille r plug hole (F) until th e oil overflow s the level pl After r efilling, tighte