Komatsu — CHECKING CHARGE PRESSURE OF NITROGEN GAS IN ACCUMULATOR (FOR CONTROL CIRCUIT)

. MAINTENANCE SERVICE PROCEDURE CHECKING CHARGE PRESSURE OF NITROGEN GAS IN ACCUMULATOR (FOR CONTROL CIRCUIT) WARNING carried out. down 4 - 78 The a ccumulator is charged wi th high-pressure nitrogen gas, so mistaken operation may cause an e xplosion, which will lead to seriou s injury or damage. Whe n handling the accumulator, alway s do as follows. Th e pressure in the hydraul ic circuit cannot be completely re moved. When remo ving the hydraul ic equipment, do not stand he direction that the oil s purts out when carrying out the o peration. In addition , loosen the bolt s slowly when c arrying out operation.

Do not disassemble the acc Do not bring it near flame o Do not make holes in it or w Do not hit it, roll it, or subje Wh en disposing of the acc umulator, the gas must be release d. Please contact y our Komatsu di stributor to hav e this work NOTIC E If the nitrogen gas charge pres sure in the accumulator is low and operations are cont inued, it will bec ome impossible to release the re maining pressure inside the hydraulic circuit if a failure oc curs on the machine . FUNCTION OF ACCUMULATO R e pressure in the control circui The a ccumulator stores th after the engine is stopped, the control circuit can be oper the fo llowing actions are po ssible.

If t he control lever is ope rated in the direction to lower t eq un uipment, it is possibl der its own weight. e for the work equipment to g raulic circuit can be released. Th e pressure in the hyd The a ccumulator is installe on th e right.