. SAFETY GENERAL PRECAUTIONS 2 - 15 Check the terrain and condition of the ground at the worksite, and determine the safest method of operation. Do not operate where there is a hazard of landslides or falling rocks . If water lines, gas lines, or high-voltage electrical lines may be bu ried under the worksite, contact each utility and identify their locations. Be careful not to sever or damage any of these lines. WORKING ON LOOSE GROUND Avoid traveling or operating your machine too close to the edg e of cliffs, overhangs, and deep ditches. The ground may be weak in such areas.
If the ground should collaps e under the weight or vibration of the machine, there is a hazard that the machine may fall or tip over. Remember that the soil after heavy rain or blasting or after earthquakes is weak in these areas. When working on embankments or near excavated ditches, there is a hazard that the weight and vibration of the machine will cause the soil to collapse. Before starting operation s, take steps to ensure that the ground is safe and to prevent the machine from rolling over or falling. DO NOT GO CLOSE TO HIGH-VOLTAGE CABLES Do not travel or operate the machine near electric cables.
There is a hazard of electric shock, which may cause Do serious injury or property damage. On jobsites where the machine follows. may go close to electric cables, always do as Before starting work near electric cables, inform the local power company of the work to be performed, and ask them to take the necessary action. Even going close to high-voltage cables can cause electric shock, which may cause serious burns or even death. Always maintain a safe distance (see the table on the right) betw een the machine and the electric cable. Check with the local power company about safe operating procedure be fore starting operations.
To prepare for any possible emergencies, wear rubber shoes an d gloves. Lay a rubber sheet on top of the seat, and be careful not to touch the chassis with any exposed part of your body. Voltage of Cables Safety Distance 100 V - 200 V Over 2 m (7 ft) 6,600 V Over 2 m (7 ft) 22,000 V Over 3 m (10 ft) 66,000 V Over 4 m (14 ft) 154,000 V Over 5 m (17 ft) 187,000 V Over 6 m (20 ft) 275,000 V Over 7 m (23 ft) 500,000 V Over 11 m (36 ft)