. SAFETY PRECAUTIONS FOR OPERATION PRECAUTIONS WHEN TRAVELING machine over a safe avoid 2 - 20 Never turn th ne stops wh en the machine is tra veling. When the engine is off, it is imposs ible to operate the steering. Apply th e brakes an d stop the machine i mmediately, if the engine stops. When travelin g on flat ground, keep the work equipment 4 cm (16 to 20 i n) high above the ground. When travelin g on rough ground, travel at low speed and operate the st eering suddenly. There is danger that the m may turn over . The work equipment may hit the ground s and cause the machine to lose its balance, or may dama machine or st Avoid travelin g over obstacles when possible.
If the m has to travel over an obstacle, keep the work equipmen to the groun d and travel at low speed. Never trav obstacles whi ch make the machine tilt strongly to one si When travelin g or carrying out operations, always keep distance from people, structures, or other machines to ontact with them. coming into c When passin g over bridges or structures, check first tha t the structure is strong enough to su pport the wei ght of the machine. When traveling on public roads, check first with the relevant authorities and follow their instructions.
When operati ng in tunnels, under bridges, under electric wires, or other places where the height is limited, o perate slowly and be extremely careful not to let the work equip ment hit anything. Do not appro ach the edge of a cliff carelessly. When dr opping soil over a cliff for banking or r eclamation, leave soil of one sc oop at the edge of the cliff and push it with the next scoop. When the mac hine passes over the top of a hill or when a l oad is dumped over a cliff, the load is suddenly red uced, and there is d anger that the travel speed rises suddenly . To prevent this, lower the travel spe ed. If the machine moves with only either side of the blade l oaded, its tail may swing.
Take care.