. OPERATION EXPLANATION OF COMPONENTS D (1) D (2) D (3) D (4) D (5) D (6) Engine coolant temperature gauge Power train oil temperature gauge Hydraulic oil temperature gauge Fuel level gauge Engine pre-heating pilot lamp Torque converter lock up pilot lamp D(7) Dual/single tilt selector display lamp (Dual tilt dozer specification) Display panel A (Speed range display, Engine speed) Display panel B (Multi-information) D(8) D(9) ENGINE COOLANT TEMPERATURE GAUGE Gauge (1) indicates temperature of the engine coolant. If the temperature is normal during operation, green range (B) will light. If red range (C) lights during operation, move the fuel control dial to lower engine speed to approx.
3/4 of the full speed, and run until the coolant temperature enters green range (B). During operation, if red range (C) lights, engine coolant temperature monitor flashes and the alarm buzzer sounds, stop the machine and run at low idle until coolant temperature enters green range (B). (A) (B) (C) :White range :Green range :Red range NOTICE If the coolant temperature gauge often enters red range (C), check the radiator for clogging. 3 - 14 METER GROUP NOTICE While the engin e is at rest, turn t he st arting s witch to the ON posi tion to see if t he engin e coolant temperature gauge, powe r train oil temperature gauge, fuel level gauge, and monitor lamps all lig ht up. it.
If they do not, h ave your Komatsu di stributo r inspect and repair