Komatsu — FRONT PANEL

. OPERATION EXPLANATION OF COMPONENTS (A) (B) (C) :Engine speed :Speed range :Red DISPLAY PANEL B (Multi-information) This monitor (9) displays information related to the condition of the machine on the top and bottom lines of the display portion. The content of the display can be switched by operating the service mode selector switch. (1) Operating mode (normal operation screen) Use this mode when operating the machine. REMARK When starting switch is turned from the OFF position to the ON position, the multi-information is set to the operating mode.

The shift mode selected by operation of the "GEARSHIFTING USING SHIFT MODE SELECTION (PAGE 3-109)" through the shift mode selection is displayed on the left side of the monitor. The total operating hours of the machine is displayed at the bottom right of the monitor. (Use the service meter function display to set the interval for periodic maintenance.) When the engine is running, the service meter advances, even if the machine is not moving. When the engine is running, the hourglass mark pilot display at the side of the meter lights up to show that the meter is advancing. The meter advances by 1 for every hour of operation, regardless of the engine speed.

If there is a failure in the machine, the failure code is also displayed on the top line. If a failure code is displayed, carry out the remedy given in "OTHER TROUBLE (PAGE 3-163)". 3 - 17 DISPLAY PANEL A (speed range display, engine speed) Meter (8) d isplays transmiss machine an d engin e speed. When th e transmission is in 1st FORWARD, t he display shows F1, and when it is in 1st R EVERSE, the display shows R1. The peripheral b ar graph i ndicates th e engine speed. When the red rang e lights up durin g running, shift the gear to a lower speed to run the engine a t a speed within the green range. used on the