Komatsu — FRONT PANEL

. OPERATION EXPLANATION OF COMPONENTS METHOD OF USING DISPLAY PANEL B (Multi-information) 3 - 25 FAN OPERATION CONFIRMATI ON LAMP the clean mode is selected. This lamp (2) lights up when When the engine is running, if the fan rotation selector switch i turned to the (b) CLN positio n, lamp (2) flashes for 3 seconds t show that the direction of changed. rotation of the fan has not bee EXPLANATION OF MODES AND CONTROLS function of displaying the following gram on the right shows the normal lay.) lacing the filters or oil. peed and the oil pressure in the elated to the electronic control. nd contrast of the display. Display panel B (1) has the four types of mode.

(The dia gram on the right shows the norm screen before the mode disp Maintenance mode This displays the time for rep PM clinic auxiliary mode This displays the engine s hydraulic circuits. Fault display mode This displays the fault code r Adjustment mode This adjusts the brightness a There are variations (sub-ite ms) in the four types of mode. For an explanation of the variatio ns, see the following items. TENANCE MODE (PAGE 3-27) LINIC AUXILIARY MODE (PAGE 3-29) T CODE DISPLAY MODE (PAGE 3-30) ADJUST MODE (PAGE 3-31) using information switch (2) and n the dashboard in front of the ease the switch, and the switch will center position as shown in the n of the switches are as follows.

be selected in a cycle by operating information switch (2) to > and METHOD OF USING MAIN METHOD OF USING PM C LINIC AUXILIARY MODE (PAGE METHOD OF USING FAUL T CODE DISPLAY MODE (PAGE 3-30) METHOD OF USING USER ADJUST MODE (PAGE 3-31) Each mode is operated by buzzer cancel switch (3) o operator's seat. After operating the switch, rel ease the switch, and the switch w return automatically to the diagram on the right. The functions of each positio >: ‘ following sequence: Mainten ance mode ←→ PM clinic auxiliary mode ← → Fault code disp lay mode ←→ Adju stment mode ←→ Maintena nce mode.