. OPERATION EXPLANATION OF COMPONENTS OPERATION EXPLANATION OF COMPONENTS switch to ‘ to rotate the cooling fan at the maximum speed. The diagram on the right shows the mode for setting to no-injection cranking. Please contact your Komatsu distributor when using this function. using this function. 7. Prelube mode The diagram on the right shows the mode for machines equipped with the prelube system. Please contact your Komatsu distributor when using this function. 3 - 33 4. Mode to rotate cooling fa n at maximum speed The diagram on the right is the mode for rotating the c oolin g fan at maximum speed.
On t his screen, operate the buzzer c ance Note that this mode is e diagramon the right is be ffective only when the display i ing given. After leaving this mod n the e, the screen returns to the nor mal mode. 5. Mode for no-injection cra 6. Setting blade tilt angle li The diagram on the right shows the mode for setting the blade tilt angle limit. Please c ontact your Komatsu distributor when REMARK selection mode, operate the buzzer cancel switch to . To return to the function selection mode, operate the buzzer c ancel switch to The brightness of the ba cklighting of the monitor panel d iffers according to whether t he front la mp is lit o r not.
Entering this mode when the front lamps are lit make s it p ossible t o adjust th e brightness when t he front l amps are lit. In the same way, entering this mode when the front lamps are not lit makes it possible to adjust the lamps are not lit. amps are possible brightness when the front