Cylinder head W 01-02-06 2011 z Turn setting screw (2) into the toggle lever and tighten the lock nut (1). Check the toggle lever axis 6 z Measure toggle lever diameter with micrometer gauge. 01 74 Note If the wear limit is reached, the toggle lever block has to be changed. Complete the toggle lever block z Push toggle lever (1) onto the toggle lever axle (2). Note - Oil the toggle lever axle (2) lightly. - The toggle lever sliding surface (3) must face the side with the notch (arrow). 0312 1557 - 0138 3/4 © 11/2004 1 2 © 39146 0 © 39146 0 © 39148 0 © 39148 0 1 2 3 © 39149 0 © 39149 0