2011 Drive system W 02-02-02 W 02-02-02 Renew crankshaft sealing ring (flywheel side) Tools - Commercial tools Assembly lever References - W 12-06-01 - Special tools 142 860 - Assembly tool Remove crankshaft sealing ring 6 z Remove flywheel О Job card W 12-06-01 . z Loosen the crankshaft sealing ring (arrow) in its seat with a pin. z Carefully drill a hole (at least 3 mm Ш) diameter in the crankshaft sealing ring. Note - Coat the drill thickly with grease so that no drill chips fall into the crankcase. - Do not damage the rear cover and crankshaft. © 11/2004 0312 1565 - 0138 1/4 © 39506 0 © 39506 0 © 39507 0 © 39507 0