Drive system W 02-10-03 2011 z Install rings with universal piston ring pliers. Note Set spring joint of the roof chamfer ring 180° to the ring joint. 6 Check the piston ring axial clearance z Measure piston ring axial clearance in the piston ring groove with a feeler gauge. Note - Do measurement with new piston rings. - In BF engines, only check axial clearance with feeler gauge in piston ring groove 2 and 3. - If the wear limit is reached, the piston has to be changed. 02 87 02 88 02 89 z Mount piston on con rod О Job card W 02-09-03 . 0312 1572 - 0138 4/4 © 11/2004 © 39217 0 © 39217 0 © 39218 0 © 39218 0