Deutz — Deutz 2011 Workshop Manual Level 3

Engine control W 04-03-01 2011 z Carefully drill a hole (at least 3 mm Ш) diameter in the crankshaft sealing ring. Note - Coat the drill thickly with grease so that no drill chips fall into the crankcase. - Do not damage the front cover and crankshaft. 6 z Turn in self-tapping screw (1) with washer. z Pull out crankshaft sealing ring with assembly lever. z Visually inspect the running surface of the crankshaft flange and front cover. 0312 1582 - 0138 2/4 © 11/2004 © 39657 0 © 39657 0 1 © 39658 0 © 39658 0 © 39659 0 © 39659 0