Crankcase W 03-08-01 2011 z Coat sealing surface of the front cover with sealant DEUTZ DW 67 . Note The connection between the camshaft pin and the centrifugal force regulator must be clean and free of oil. z Turn engine 180°. Note The oil tray sealing surface on the crankcase must face up. 6 z Mount the front cover with shaft sealing ring and tighten the screws. z Align the front cover flush with the oil tray sealing surface (arrows). Note - The sealing lips of the shaft sealing rings (1) must touch the bearing journal all round. - Do not tighten screws. z Tighten the screws in the tightening order. 03020 z Install the lube oil tray О Job card W 08-08-02 .
0312 1576 - 0138 6/12 © 11/2004 © 34110 1 © 34110 1 1 1 © 39450 0 © 39450 0 © 34112 1 © 34112 1