Deutz — Deutz 2011 Workshop Manual Level 3

2011 Engine control W 04-04-12 W 04-04-12 Renew toothed belt and clamping roller (old version of the clamping roller) Tools - Commercial tools References - W 12-02-01 (FL, BFL engines) - W 12-02-01 (FM, BFM engines) - W 12-08-03 8189 - Torx tool kit 9120 - Special bit, 70 mm long 9122 - Special bit, 25 mm long Caution! The toothed belt and the clamping roller must be renewed after every disassembly regardless of their time in operation. - Special tools 100 700 - Setting bolt 144 130 - Holder ! Note Distinguishing features of the old version of the clamping roller: - Pointer and notch (1) serve to set and check the toothed belt tension.

- The clamping roller is locked by a guide fork (2) on the front cover. 6 Renew toothed belt and clamping roller z Remove V-belt О Job card W 12-02-01 (FL, BFL engines) О Job card W 12-02-01 (FM, BFM engines) In FM, BFM engines z If available, unscrew screws (1) and remove fan. © 11/2004 0312 1584 - 0138 1/16 1 2 © 39258 0 © 39258 0 1 1 © 39625 0 © 39625 0