Deutz — Deutz 2011 Workshop Manual Level 3

Engine control W 04-04-12 2011 z Insert new clamping roller with the guide fork (1) of the base plate in the guide pin (2) of the front cover. Note When installing a hydraulic pump, watch out for different clamping rollers. Width of clamping roller for: - Camshaft drive 30 mm - Hydraulic pump drive 35 mm z Screw in screw (3). 6 z Position setting eccenter (arrow) in 6:00 h position. z Press the clamping roller against the toothed belt and pre-tighten the screw (1). 04052 z Align the toothed belt so that there is an even distance between the cover and toothed belt of 8 to 9 mm . 0312 1584 - 0138 8/16 © 11/2004 3 1 2 © 39362 0 © 39362 0 1 © 39363 0 © 39363 0 © 34132 1 © 34132 1