Deutz — Deutz 2011 Workshop Manual Level 3

Engine control W 04-04-12 2011 Note - The pointer of the clamping roller must be in line with the notch (1). - If the marks are not in line, the toothed belt tension must be corrected. Correct the toothed belt tension 6 z Loosen screw and re-tighten. 04052 z Turn the setting eccenter in the direction of the arrow (counterclockwise) until the pointer of the clamping roller is in line with the notch (1). z Tighten screw. 04052 Check engine control times Lock camshaft. z Insert setting bolt (1) for the camshaft lock in the bore and hold lightly. z Turn the crankshaft in the direction of rotation of the engine (clockwise) until the setting bolt engages the bore of the camshaft.

z Turn the setting bolt into the crankcase to the stop. 0312 1584 - 0138 11/16 © 11/2004 1 © 34140 1 © 34140 1 1 © 34134 1 © 34134 1 1 © 39186 0 © 39186 0