Engine control W 04-04-12 2011 z The engine control times are set correctly when the setting bolt can be turned another 0.75 to 2.25 turns up to the stop in the crankcase. Note If the screw-in depth (X) deviates from the specification, the toothed belt and the clamping roller must be changed. z Unscrew the setting bolts for camshaft and crankshaft locking. z Tighten locking screw (1) with new CU sealing ring. 6 03003 z Tighten locking screw (1) with new CU sealing ring. 03003 0312 1585 - 0138 13/16 © 11/2004 X © 39543 0 © 39543 0 1 © 39670 0 © 39670 0 1 © 39187 0 © 39187 0