Crankcase W 07-02-06 2011 z Push guide bush (1) onto assembly pin. Note The chamfer (arrow) must face the crankcase in assembly. 6 z Mount centering on crankcase. Note - The crankcase contact surface must be clean. - The fixing bolt (1) must engage the bore (2). z Tighten screw (1). z Knock in the guide sleeve until the assembly pin touches the spacer bush (arrow). z Remove centering with assembly pin. 0312 1592 - 0138 4/12 © 11/2004 1 © 39078 0 © 39078 0 2 1 © 39079 0 © 39079 0 1 © 39082 0 © 39082 0