Crankcase W 07-02-06 2011 z Drill oil rise pipe (1) with a Ш 5.5 mm drill on one side. Note - Coat the drill with grease so that no drill chips fall into the crankcase. - Remove all drill chips. 6 z Insert extraction tool (1) in the oil rise pipe until the bolt (2) snaps into the bore (arrow). z Mount spacer bush (1) and disc, tighten nut. 0312 1592 - 0138 6/12 © 11/2004 1 © 39089 0 © 39089 0 1 2 © 39093 0 © 39093 0 1 © 39095 0 © 39095 0