Crankcase W 07-02-06 2011 z Tighten new locking screw. Note The threaded bore for the locking screw must be free from oil, corrosion and dirt and be dry. 03007 Install control linkage 6 z Insert control linkage with spring in the guide bushes. Note - Note installation position, the latch (1) must face the oil filling nozzle (2). - Pay attention to easy action of the control linkage. z Press together spring and insert cylindrical pin (1) in the bore (2). Note - The cylindrical pin must engage in the recess (arrow) for the control path limit. - Make sure that the spring touches the cylindrical pin (3).
0312 1592 - 0138 11/12 © 11/2004 © 39235 0 © 39235 0 1 2 © 39236 0 © 39236 0 3 1 2 © 39237 0 3 1 2 © 39237 0 © 39237 0