Deutz — Deutz 2011 Workshop Manual Level 3

Fuel system W 07-04-01 2011 z Pull out roller tappet (arrow) using a suitable tool, e.g. outside locking pliers. Note - Put down the components in the order of installation, note order of cylinders. - Do not damage the roller tappet. 6 Install the injection pump z Unscrew cap (arrow) and remove sealing ring. z Move control linkage to mid position. Note Ignition off / stop magnet free. z Turn in setting bolt (1) to stop. 0312 1595 - 0138 2/8 © 11/2004 © 34044 1 © 34044 1 © 34173 1 © 34173 1 1 © 34174 1 © 34174 1