Fuel system W 07-04-01 2011 Determine depth dimension z Measure depth dimension "A" from the crankcase rest to the spring head rest of the roller tappet. Note The crankcase rest must be clean. z Read and note measured value. 6 z Read and note installation dimension "X" from the rating plate of the respective injection pump. Note The installation dimension "X" serves exclusively to calculate the compensation gasket. Do not measure on the disassembled injection pump. z Determine difference between installation dimension "X" and depth dimension "A". Example:
0312 1595 - 0138 4/8 © 11/2004 © 34178 1 © 34178 1 © 34179 1 © 34179 1 Installation dimension "X" 60.00 mm Depth dimension ”A” 59.35 mm Difference 0.65 mm