Fuel system W 07-04-01 2011 z Move control linkage to mid position. Note Ignition off / stop magnet free. z Turn in setting bolt (1) to stop. z Turn crankshaft until the cam for the respective injection pump is standing on the cam basic circuit (1). 6 z Oil lightly and insert the roller tappet. Note - Note the assignment of the roller tappet. - The guide pin (1) on the roller tappet must engage in the groove (2). Note When replacing the roller tapper, the assignment of the injection pump to the roller tappet must be observed. 07 16 07 17 0312 1596 - 0138 3/8 © 11/2004 1 © 39115 0 © 39115 0 1 © 39116 0 © 39116 0 2 1 © 39117 0 © 39117 0