Fuel system W 07-04-01 2011 Install the injection pump Note When replacing the injection pump the assignment of the injection pump to the roller tappet must be observed. 07 16 07 17 z Pull out locking pin (1). 6 Note Remove the gasket (2) together with the locking pin. z Unscrew cap (3) and remove sealing ring. z Insert marking pin (1) in the bore (2) of the injection pump. Note Do not press in the marking pin completely. 0312 1596 - 0138 5/8 © 11/2004 © 39113 0 © 39113 0 1 2 3 © 39120 0 © 39120 0 1 2 © 39121 0 © 39121 0