2011 Fuel system W 07-06-03 W 07-06-03 Determine the thickness of the shim gasket Tools - Commercial tools References - W 07-04-01 (Motorpal) 8170 - Depth measuring appliance Note - All contact and measuring surfaces must be absolutely clean to rule out measuring errors! - The following work procedure must be performed for every injection pump if necessary. z Remove injection pump and compensation gasket. 6 z Removal and installation of roller tappet, visual inspection. О Job card W 07-04-01 (Motorpal) z Mount probe for measuring range 50 to 75 mm on depth measuring screw. Note Presetting of the measuring range approx. 52 mm.
© 11/2004 0312 1638 - 0138 1/4 © 39892 1 © 39892 1 © 39183 0 © 39183 0