Fuel system W 07-07-02 2011 Check injection nozzle z The nozzle needle (1) must slide back to its seat slowly and jolt-free by its own weight when the nozzle body (2) is held vertically. Note - Do not touch the nozzle needle with your fingers. - The nozzle needle and nozzle body are lapped together and may not be switched round or changed individually. - If the nozzle needle slides back with a jolt, clean the injection nozzle in diesel fuel again, renew if necessary. - Also clean the new injection nozzle in clean diesel fuel. 6 z Inspect the seat surfaces of the adapter for wear. Note Make sure the centering pins (arrows) are in place. Complete injection valve z Insert shim disc.
Note The opening pressure depends on the strength of the shim disc. 0312 1599 - 0138 2/4 © 11/2004 1 2 © 33904 1 © 33904 1 © 33905 1 © 33905 1 © 36274 1 © 36274 1