2011 Fuel system W 07-08-02 W 07-08-02 Remove and install charge pressure full load stop (LDA) Tools - Commercial tools Note - Collect drained operating materials in suitable vessels and dispose of according to regulations. - A test stand run is necessary to set the charging pressure-dependent full load stop. 8011 - Clamping pliers 8027 - Pliers insert - Special tools 170 050 - Special wrench Caution! Observe the safety regulations and national specifications for handling fuels! ! Remove charging pressure full load stop 6 In FL, BFL engines z Unscrew screws (1) and remove the air duct cover (2). z Pull the cable plug out of the solenoid valve (1) if available.
z Pull out the underpressure line (2). © 11/2004 0312 1602 - 0138 1/6 2 1 1 © 39080 0 © 39080 0 1 2 © 39381 0 © 39381 0