4 Technical data 4.1 Test and adjustment data 2011 04 00 Engine control 4 05 00 Speed governing 0312 1642 - 0138 16/22 © 11/2004 ID No. Name Additional information Value Unit 04 10 Control times for 1 mm valve clearance 04 11 Inlet opens after UT 3°12’ ° 04 12 Inlet closes after LT 16°48’ ° 04 13 Outlet opens before LT 27°48’ ° 04 14 Outlet closes before UT 4°12’ ° 04 20 Camshaft 04 21 Cam stroke (inlet) 6.6 ± 0.08 mm 04 22 Cam stroke (outlet) 6.8 ± 0.08 mm 04 31 Diameter of the camshaft bearing pin Standard 53.045 - 53.060 mm ID No.
Name Additional information Value Unit 05 00 Speed governing 05 04 Setting screw for full load stop 12 ±0.5 mm 05 05 Setting screw for minimum speed 23 ±0.1 mm 05 06 Screw in depth of the adapter capsule 6.4 ±0.5 mm 05 41 Full load stop (charge pressure- dependent) in fuel filter console Stop screw 18 ±1 mm