Deutz — Deutz 2011 Workshop Manual Level 3

2011 Lube oil system W 08-11-02 W 08-11-02 Remove and install oil pressure regulating valve, check Tools - Commercial tools Caliper gauge Note Collect drained operating materials in suitable vessels and dispose of according to regulations. Note Overview of valve row assignment - An oil pressure regulating valve (1) is installed as standard in the upper oil channel. The lower oil channels are empty and sealed. - In engines with a heater connection, additional oil pressure regulating valves (2) are available in the lower two oil channels as well as a transfer nipple for supply (3) and return (4).

6 1 3 4 2 © 39520 0 Remove oil pressure regulating valve (without heater connection) z Unscrew cap (1), remove compression spring and valve piston. Note When removing the cap the following parts may jump out under the pressure of the compression spring. © 11/2004 0312 1612 - 0138 1/8 1 © 39060 0 © 39060 0