Deutz — Deutz 2011 Workshop Manual Level 3

Other components W 12-08-02 2011 Install hydraulic pump z Pull jackets (1 and 2) onto coupling sleeve (3). Note The punch-out of the jackets must be aligned to the teeth of the coupling sleeve. z Grease the inside teeth of the coupling sleeve with graphite grease G 500 . 6 z Grease the toothed shaft with graphite grease G 500 . z Plug the coupling sleeve (2) to the toothed shaft. Note - Note installation position. - The teeth of the coupling sleeve must engage the toothed shaft. z Insert hexagon bolts in the hydraulic pump. z Check the protrusion of the bolts.

Note The maximum protrusion ”X” may not be greater than 18 mm, renew bolts if necessary or place additional washers under the bolt head. 0312 1630 - 0138 2/4 © 11/2004 3 1 2 © 39092 0 © 39092 0 2 1 © 34243 1 © 34243 1 X © 34244 1 © 34244 1