Electrical system W 13-02-03 2011 z Measure the gap dimension with a feeler gauge between the running wheel and the blower jacket inlet. 09 91 6 z Compensate gap dimension with the appropriate spacer disc (1). Note Spacer discs of 5 to 7 mm are available. z Press the protective grille (1) carefully into the blower jacket inlet. Note Observe the fastening points. 0312 1633 - 0138 8/12 © 11/2004 © 39578 0 © 39578 0 1 © 39574 0 © 39574 0 1 © 39579 0 © 39579 0